Maxview MXL002/TWIN Bedienerhandbuch PDF herunterladen (Seite 18)

Installing Control Panel

Choose most suitable method of communication between Control Panel and Control Box.

Wireless Mode

1. Install batteries into Control Panel in accordance with instructions on page 20.

2. Turn Control Box and Control Panel on.

3. Pair Control Box and Panel together see page 21.

4. Choose suitable location for Control Panel – press change sat button

periodically to check wireless reception.

5. When satisfied with the location of the Control Panel mark the position of the

fixing holes on the magnetic mount then attach to wall with 2 No.6 screws.

Cable Mode

1. Choose a location to mount the Control Panel.

2. Mark the fixing holes then make a pilot hole with a drill or bradawl.

3. If required remove one of the knock outs with a pair of pliers

4. Pass cable through hole in Magnetic Mount.

5. Screw the Magnetic mount to the wall with the RJ25 cable laying flat and un-twisted

in the channel.

6. Connect the Control Panel to the RJ25 cable and place onto Magnetic Mount whilst

pulling through the cable.

Knock-outs

for vertical

cable routing

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

Keine Kommentare

Maxview MXL002/TWIN Bedienerhandbuch Seite 18