Maxview MXL002/TWIN Bedienerhandbuch PDF herunterladen (Seite 11)

Selecting an Installation Location

Positioning the Antenna Unit

• Check for obstructions such as roof lights and vents.

• Check for electrical cables beneath screw fixing points.

• Check Antenna Unit cables will reach Control Box (Maxview can supply extended

cables).

• Do not allow the dish to overhang the edge of the vehicle

• Clearance around antenna system when in use is shown with reference E

Positioning Control Box

Site the Control Box in a convenient location where:

• Front and rear connections are accessible.

• Cables can be routed and concealed neatly.

• There is an electrical supply of 12v dc permanent and ignition.

• There is adequate ventilation.

• The Control Box is not encased with metal (if using wireless mode).

• Material construction and thickness is suitable for fixings.

Positioning Control Panel

The Control Panel is designed to be easily visible in the living area as it displays a clock and

thermometer when in sleep mode.

• Do not place near wet hazard areas such as near sinks or bathroom.

• Do not place near heat sources or in direct sunlight.

• Avoid placing Control Panel next to walk ways where it could easily be knocked.

65cm

85cm

100 117

17 17

49 49

67 85

110 125

Direction of travel

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Keine Kommentare

Maxview MXL002/TWIN Bedienerhandbuch Seite 11