Maxview MXL002/TWIN Bedienungsanleitung PDF herunterladen (Seite 13)

Service Monitoring Tools Quick Start Guide

Danfoss Turbocor Compressors Inc. 13

M-SM-002-EN Rev. C

1.4.1 Shared Connection

1. Once you have selected Shared as your connection type, enter your shared host name

and TCP port number. The default values are usually fine.

2. Click the Connect to Remote Host button.

3. Select a Serial Port Name. The items listed in the drop-down labeled Serial Port identify

available compressor data streams - typically, the default (and most likely only) selection is

sufficient.

4. If the slave address and baud rate are known, follow steps a and b below; otherwise

proceed to step 5.

a. Enter the known slave address in the Slave Address field and select the known baud

rate from the Baud Rate drop-down list

b. Click Connect. You are now connected.

Figure 12 Shared Connection - Connected

c. Proceed to Step 6.

5. If the slave address and baud rate are unknown, do the following:

a. enter a slave address search range or list of values to test for detection in the Search

Addresses field and click the Search button.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 28 29

Keine Kommentare

Maxview MXL002/TWIN Bedienungsanleitung Seite 13